Vaporesso Armour OCTA

د.إ230.00

✓ Brand: Vaporesso
✓ Model: Armour OCTA
✓ Maximum Output: 220W
✓ Battery: Dual 18650 (Not Included)
✓ Tank Capacity: 6ml
✓ Coil Resistance: 0.2Ω / 0.4Ω
✓ Charging: USB Type-C, DC 5V/2.5A
✓ Display: 0.96-inch TFT Screen
✓ Dimensions: 146.3 × 30.8 × 55 mm

Vaporesso Armour OCTA – 220W Technical Overview

The Vaporesso Armour OCTA is a dual-battery electronic vaping device from the Vaporesso ARMOUR series. Its technical configuration includes a maximum output of 220W, support for two removable 18650 batteries, a 6ml reservoir and a 0.96-inch TFT display.

The device measures 146.3 × 30.8 × 55 mm and supports USB Type-C charging with a specified DC input of 5V/2.5A. This product overview explains its electrical specifications, battery configuration, display, compatible coil resistances and maintenance requirements.

Vaporesso Armour OCTA Technical Specifications

SpecificationDetails
ManufacturerVaporesso
ModelARMOUR OCTA
Maximum Output220W
Battery Configuration2 × 18650
Batteries IncludedNo
Reservoir Capacity6ml
Coil Resistance0.2Ω / 0.4Ω
Charging ConnectionUSB Type-C
Charging InputDC 5V/2.5A
Display0.96-inch TFT
Dimensions146.3 × 30.8 × 55 mm

220W Maximum Output

The Vaporesso Armour OCTA has a specified maximum output power of 220 watts.

Output power describes the electrical power delivered by the device under supported operating conditions. The actual operating range depends on battery condition, installed coil resistance and the device’s electronic control system.

The maximum output rating should not be interpreted as a recommended setting for every compatible coil. Operating limits must follow the specifications supplied with the installed heating component.

Dual 18650 Battery Configuration

The Armour OCTA uses two removable 18650 rechargeable batteries. These batteries are not included in the listed product configuration.

The designation 18650 refers to a cylindrical rechargeable battery format. Battery compatibility depends on physical dimensions, electrical specifications and the requirements published by the device manufacturer.

Because the device uses two batteries, battery selection and handling require particular attention.

Battery Safety Considerations

Only batteries that meet the manufacturer’s requirements should be used. Both batteries should be suitable for the device and maintained in appropriate condition.

General safety precautions include:

  • Do not use batteries with damaged insulating wraps.
  • Do not mix batteries with different specifications or significantly different conditions.
  • Keep loose batteries away from metallic objects.
  • Use suitable protective cases when transporting spare batteries.
  • Do not expose batteries to excessive heat or moisture.
  • Follow the manufacturer’s battery installation and polarity instructions.

6ml Reservoir Capacity

The Vaporesso Armour OCTA configuration described here includes a reservoir with a nominal capacity of 6ml.

Reservoir capacity describes the specified liquid volume of the tank assembly. Regional versions may differ because of local product requirements.

The reservoir should be inspected regularly for visible cracks, damaged seals or leakage.

0.2Ω and 0.4Ω Coil Configurations

The supplied product specifications identify two coil resistance options: 0.2Ω and 0.4Ω.

Electrical resistance is measured in ohms and influences the operating characteristics of the heating element.

0.2Ω Coil Resistance

A 0.2Ω coil has a nominal electrical resistance of 0.2 ohms. Its supported operating conditions depend on the exact coil model and manufacturer specifications.

0.4Ω Coil Resistance

A 0.4Ω coil has a nominal resistance of 0.4 ohms. It should be operated only within the electrical limits specified for that particular component.

Coils with different resistance values should not be assumed to have identical operating requirements.

0.96-Inch TFT Display

The Vaporesso Armour OCTA incorporates a 0.96-inch TFT screen.

TFT stands for Thin-Film Transistor, a display technology used in electronic devices.

The screen forms part of the device’s user interface and provides access to supported operating information.

The exact information displayed and available interface settings should be confirmed using the official operating manual.

USB Type-C Charging Specifications

The Armour OCTA supports USB Type-C charging with a specified electrical input of DC 5V/2.5A.

The USB Type-C designation identifies the charging connector, while the voltage and current values describe its specified electrical input.

Charging equipment must meet the manufacturer’s requirements. Damaged charging cables and connectors should not be used.

For removable batteries, users should also follow the battery manufacturer’s charging and handling instructions.

Physical Dimensions and Construction

The published dimensions of the Vaporesso Armour OCTA are:

  • Height: 146.3 mm
  • Width: 30.8 mm
  • Depth: 55 mm

These dimensions describe the external size of the assembled device and are relevant when comparing electronic device specifications.

Exterior colors and finishes may vary depending on the retail version.

Maintenance and Inspection

Regular inspection helps identify visible damage to electronic components and replaceable parts.

Before handling or maintaining the device, consult the manufacturer’s operating instructions.

  • Keep the USB charging connector clean and dry.
  • Inspect the tank for cracks or leakage.
  • Check removable batteries for visible damage.
  • Do not expose the device to excessive heat.
  • Do not immerse electronic components in water.
  • Do not modify the battery compartment or electrical contacts.
  • Keep the device away from children and pets.

If the device becomes damaged, overheats or operates abnormally, discontinue use and consult the manufacturer.

ARMOUR Series and Other Vaporesso Devices

The Armour OCTA belongs to the Vaporesso ARMOUR product family. Devices within this family may differ in output power, battery configuration, physical dimensions and supported components.

For a technical comparison with a smaller rechargeable pod system, see the

Vaporesso XROS 4 MINI specifications
on Asad Smoking.

The XROS 4 MINI uses an integrated 1000mAh battery, whereas the Armour OCTA requires two removable 18650 batteries. These devices also differ substantially in dimensions and electrical configuration.

Official Vaporesso Armour OCTA Documentation

For manufacturer information, operating instructions and technical documentation, visit the

official Vaporesso ARMOUR OCTA product page
.

Frequently Asked Questions

What is the maximum output of the Vaporesso Armour OCTA?

The specified maximum output is 220W.

Which batteries does the Armour OCTA require?

The device requires two compatible 18650 rechargeable batteries.

Are batteries included?

No. Batteries are not included in the listed configuration.

What is the reservoir capacity?

The specified version has a 6ml reservoir.

Which coil resistances are listed?

The supplied specifications identify 0.2Ω and 0.4Ω coil configurations.

What display does the device use?

The Armour OCTA features a 0.96-inch TFT display.

Does the device support USB-C charging?

Yes. It uses USB Type-C charging with a specified DC input of 5V/2.5A.

What are the dimensions of the Armour OCTA?

The specified dimensions are 146.3 × 30.8 × 55 mm.

Where can I find official operating instructions?

The manufacturer provides product information through its official ARMOUR OCTA documentation linked above.

Safety Information

This electronic device is intended for adults of legal age. Nicotine-containing e-liquids are addictive. Follow the manufacturer’s instructions and applicable safety requirements. Keep batteries, electronic devices and related materials away from children and pets.

Shopping Cart
Scroll to Top